Instructions: Quantity: An average of 21 pounds (without tops) is needed per canner load of 7 quarts; an average of 13-1/2 pounds is needed per canner load of 9 pints. A bushel (without tops) weighs 52 pounds and yields 15 to 20 quarts-an average of 3 pounds per quart.

Quality: Beets with a diameter of 1 to 2 inches are preferred for whole packs. Beets larger than 3 inches in diameter are often fibrous.

Procedure: Trim off beet tops, leaving an inch of stem and roots to reduce bleeding of color. Scrub well. Cover with boiling water. Boil until skins slip off easily; about 15 to 25 minutes depending on size. Cool, remove skins, and trim off stems and roots. Leave baby beets whole. Cut medium or large beets into 1/2-inch cubes or slices. Halve or quarter very large slices. Add 1 teaspoon of salt per quart to the jar, if desired. Fill jars with hot beets and fresh hot water, leaving 1-inch headspace.

Adjust lids and process following the recommendations in Table 1 or Table 2 according to the method of canning used. Table 1. Recommended process time for Beets in a dial-gauge pressure canner.

Style of Pack: Hot. Jar Size: Pints, Quarts. Process Time: 30 minutes for Pints, 35 minutes for Quarts. Canner Pressure (PSI) at Altitudes of 0 - 2,000 ft: 11 lb.
2,001 - 4,000 ft: 12 lb.
4,001 - 6,000 ft: 13 lb.
6,001 - 8,000 ft: 14 lb.

Table 2. Recommended process time for Beets in a weighted-gauge pressure canner.

Style of Pack: Hot and Raw. Jar Size: Pints, Quarts. Process Time: 30 minutes for Pints, 35 minutes for Quarts. Canner Pressure (PSI) at Altitudes of 0 - 1,000 ft: 10 lb.
Above 1,000 ft: 15 lb.

If you would like to email yourself the recipe for later use, or share the recipe with your friends or family, enter the email addresses below and this recipe will be emailed to you and others as well.